1. Magnetic Float Type Level     Gauge

Magnetic Float Type Level Gauge : Used for observing almost all fluid level which is poisonous gas or liquid tank and boiler drum with lower and higher pressure and it's have weight with outstanding safety from its damage or breakage and to be of low price.

2. Magnetic Float Type Level     Gauge with Level Switch or     transmitter

Magnetic Float Type Level Gauge with Level Switch or transmitter Suitable for alarm & control of various liquid level, any fluid level can be observed through its central control system.

3. Magnetic Float Level Gauge For     underground tank

Magnetic Float level Gauge For underground Tank : Used for observing the fluid level in underground tank or tank under manhole.

4. Magnetic Float Type Level     Gauge with Teflon Lined

Magnetic Float Type Level Gauge with Teflon Lined : Used for observing the corrosive fluid level effectively by lining the wetted part of this level gauge.

5. Magnetic Float Type Level     Switch

Magnetic Float Type Level Switch : Used for observing the level of liquid as well as for outputting alarm and control a contact points of liquid requested by customer arbitrarily.(ENCLOSURE - Ex d II C(H2) T5 IP 65)

6. Magnetic Float Type Level     Transmitter

Magnetic Float Type Level Transmitter : Used for detecting the level of measuring object from various level in the vessels or tanks and for transmitting it after converting to electric output signal and direct indication can also be possible with gold & blue color.(ENCLOSURE- Ex d II
C(H2) T5 IP 65)

1. Flapper Type Sight Glass

Used for observing the state of fluid flow depending on opening & closing of the flapper on fluid flow.

2. Ball Type Sight Glass

Used for observing the fluid flow of common flow velocity by the motion of balls within the screen.

3. Ring Ball Type Sight Glass

Used for observing the fluid flow with rapid flow velocity by the motion of balls within the rigid ring.

4. Lantern Type Sight Glass

Used for observing the state of fluid flow for all direction and it can be used as calibration port.

5. High Pressure Type Sight Glass

Used for high pressure & high temperature.

1. Orifice Plate

Suitable for universal flow conditions and the most popular primary device with its simple shape, easy manufacturing, low cost & high reliability.

2. Orifice plate with ring

Used for flow measurement of smaller and medium pipe size at low pressure.

3. Orifice plate with integral block

Used for high pressure and high temperature service, similar to holding ring type as cutted and shaped from one block of metal.

4. Ring joint type orifice plate

Orifice plate easily removable and interchangeable and calibrated bore with burr free sharp edge and suitable
for a fluid having high pressure & high temperature.

5. Orifice Flange Assemblies

Used in conjunction with orifice plate for flow measurement and suitable for almost all fluid conditions on primary differential device.

6. Multi type Restriction Orifice

Used for reducing fluid pressure & for eliminating problems by sound pressure level or cavitation.

7 Flow Nozzle

Suitable for determining the flow rate of fluid flowing at
high pressure and temperature and is permit approximately 65% greater capacity than an orifice plate.

8. Venturi Tube

Used for measurement of flow when is important to keep
the net permanent pressure loss at a minimum. Also, this is noted for long life span.

9. Integral Orifice

Suitable for measuring fluid of small bore with its high accuracy & used in combination with differential pressure transmitter, with easy installation as well as simple maintenance.

10. Taper Seg Tube

Suitable for a wide reynolds range of flow measurement, especially measuring clean as well as non-clean fluids such as slurries & having shorter length of straight pipe for upstream & downstream compared to other fluid meter using differential pressure flow meter with excellent repeatability and accuracy.

11. Averaging Pitot tube

Suitable for measuring fluid of small bore with its high accuracy & high flow measurement easy & simple installation due to its insertion into pipeline & economic energy cost due to its less pressure loss rather than orifices.

12. Tapless Venturi

Used for measuring slurry fluid, solidified liquids at
low temp. or liquid vaporizing at high temperature & no pressure taps for measuring differential pressure.